Watermaker Aqua Nautica AN-55

Watermaker Aqua Nautica AN-55

€4950 €4455

Products Specifications and dimensions:

  • Power Requirements: 17 amps @ 12 VDC; 8,5 amps @ 24 VDC*
  • Rate of Water Production: 53 liters/hr.  (14.5 U.S. gal./hr)   ±15% at 13.8 VDC
  • Feed Water Flow Rate: 550 liters/hr. (145 U.S. gal./hr)
    Reverse Osmosis performance varies with the feed water temperature. The rated performance is tested at 26°C / 80°F water temperature at a salinity of 33g/ltr.
  • Quiet operation: less than 59 db at 1m distance.
  • Salt Rejection: min. 99.5%
  • Product Water TDS Range: less than 500ppm TDS
  • Salinity Range: up to 50,000ppm TDS (NaCl)
  • PH Range: 4 – 11
  • Free Chlorine Tolerance: <0.1 ppm
  • Operating Pressure:  55 bar  (800psi)
  • Feed Water Temperature Range: min. 0.5°C/33°F, max 45°C/113°F
  • Weight: 38 kg dry without water hoses and cables 
clark-pump-aqua-nautica-p50
filter-unit-P55
pumpa-305b
aqua-nautica-p25-watermaker-14

Fresh water flush Procedure

The fresh water flush prepares your watermaker for a shut down period of seven to ten days. It can be repeated indefinitely as an alternative to the chemical long term storage of the membrane element. CAUTION: The boats fresh water pressure should not exceed the range of the pressure gauge. ( pressure must be less then 8 bar)

CAUTION: After storage, discard the product water for at least thirty minutes of initial operation before drinking or before use in food preparations.

Feed Water Flow Rate: 550 liters/hr. (145 U.S. gal./hr) Reverse Osmosis performance varies with the feed water temperature. The rated performance is tested at 26°C / 80°F water temperature at a salinity of 33g/ltr.e watermakers

Installing watermaker Aqua Nautica

Testimonials

How to buy watermakers?

Aqua Nautica watermakers can be purchased through our distribution network and delivered almost anywhere in the world. To purchase the device, contact your geographically nearest distribution center or authorized distributor